Fluid Dispensing Valves and Nozzles

PV-10 Piezo Valve

PV-10 Piezo Jet Dispensing Valve

The Anda PV-10 Piezo jet dispensing valve uses a piezo driven tappet to accelerate the dispensed media in a way, that small drops are shot over a long distance precisely to target. The valve’s construction is suitable for low viscous fluids such as cyan acrylate as well as for highly viscous media such as adhesives or grease.

  • Minimum dispense diameter: .25mm or 250 µm.
  • Maximum dispensing speed: 280 dots/second.
  • Heated Valve, Maximum viscosity: 1,000,000 CPS
  • Max. Working Frequency: 1000Hz
  • Application: Precision Coating

PS-8500 Pnuematic Injection Valve

PS-8500 Pnuematic Injection Valve

Patented technology. Non-contact dispensing of various liquid types: Underfill, UV adhesive, solder paste, silicon, epoxy, conformal coating, surface mount adhesive, etc.

  • Minimum dispense diameter: 250 µm.
  • Maximum dispensing speed: 200 dots/second.
  • Heated Valve, Maximum viscosity: 250,000 CPS

E-01 Electromagnetic Jetting Valve

E-01 Electromagnetic Jetting Valve

Electromagnetically driven, non-contact jetting and dispensing. Low Impact, long life span, highly accurate, high speed, and low maintenance. Suitable for low viscosity dispensing such as underfill, UV adhesive, flux, and grease.

  • Viscosity range: 200-3000 CPS (Heated Valve)
  • Min. Dot diameter: 0 .4mm
  • Min. Line width: 0.5mm
  • Max. Working Frequency: 200HZ
  • Valve Temperature: ambient ~ 80˚C
  • Needle inner diameter: 0.1-0.8mm

Jet-16 Pnuematic Jetting Valve

Jet-16 Pnuematic Jetting Valve

Non-contact jetting. Compact Size, long life, high accuracy, high speed, easy to maintain. Suitable for fluid & paste dotting, dispensing, underfill, UV adhesive, SMT Adhesive, and grease.

  • Viscosity range: 200 – 200,000 CPS (Heated Valve)
  • Min. Dot diameter: 0 .4mm
  • Min. Line width: 0.5mm
  • Max. Working Frequency: 200HZ
  • Nozzle Temperature: ambient ~ 80˚C
  • Needle inner diameter: 0.1-0.8mm

TDS-10 Axial Slider Valve

TDS-10 Axial Slider Valve

Compact size, long life, no residual pressure, and low maintenance. Suitable for paste or similar dispensing, coating, and pouring. Dispense material with metal particles as solder paste or phosphor powder with precise dispensing results.

  • Viscosity range: 20-300K CPS (Heated Valve)
  • Min.dot diameter: 0.3mm
  • Min. line width: 0.2mm
  • Max. Working Frequency: 100HZ
  • Nozzle Temperature: ambient ~ 80˚C
  • Needle inner diameter: 0.1-1mm

TDS-25 Radial Slider Valve

TDS-20 Radial Slider Valve

Compact size, long life, no residual pressure, and low maintenance. Suitable for paste or similar dispensing, coating, and pouring. Dispense material with metal particles as solder paste or phosphor powder with precise dispensing results.

  • Viscosity range: 20-300K CPS (Heated Valve)
  • Min.dot diameter: 0.3mm
  • Min. line width: 0.2mm
  • Max. Working Frequency: 100HZ
  • Nozzle Temperature: ambient ~ 80˚C
  • Needle inner diameter: 0.1-1mm

TDS-40 Radial Slider Valve

TDS-40 Electromagnetic Dispense Valve

Air-Driven, compact size , long life span, non-residual pressure, and easy maintenance. Suitable for paste or similar dispensing, coating, and pouring. e.g.: surface mount adhesive, UV adhesive, silicone, etc

  • Viscosity Range: 2K-300K CPS (Heated Valve)
  • Min. dot diameter: 0.3mm
  • Min. line width: 0.2mm
  • Max. Working Frequency: 1OOHz
  • Nozzle Temperature variable: ambient ~ 80˚C
  • Needle Inter diameter: 0.1-1mm
  • Double-electromagnetic valve

LG-02 Electromagnetic Screw Valve

LG-02 Electromagnetic Screw Valve

Optimizes dispensing accuracy by optimizing screw pitch to suit liquids of 2K-400K viscosity, such as: surface mount adhesive, silver paste, UV adhesive, silicon, epoxy glue, and conformal coating.

  • Viscosity range: 2-400K CPS (Heated Valve)
  • Minimum dispense space: 1.2mm
  • Minimum line width: 1mm
  • Minimum dispensing diameter: 1.5mm

Fluid Dispensing ExpertsValve Questions? Contact Us