CURING OVENS

iCure Infrared Curing Oven Series

Inline Compact Infrared (IR) Rapid Heat Curing Ovens

Description


Anda iCure Series curing ovens are compact, inline infrared (IR) curing systems. iCure is highly unique, it combines SMEMA height upper and lower (optional) return conveyor curing within the same compact work cell. This enables iCure to perform the job of ovens twice its length for applications that require a second oven to cure coatings, adhesives or inks applied to an inverted Pallet/PCBA. The iCure Series provides manufacturers a 100% reduction in factory oven floor space.

The systems SMEMA communication and touch screen control interface integrates into new or existing factory automation lines or can also be used stand-alone. Pairs seamlessly with selective conformal coating spraying systems.

Standard Features


  • PLC and touch screen control
  • Edge carrying, variable speed pin chain conveyor
  • Rail expansion compensation
  • SMEMA communication protocol
  • 100 mm top and bottom side component clearances
  • Thermocouple process control
  •  Independent Infrared (IR) heating zones

Optional Features


  • Under assembly conveyor heating
  • Return conveyor
  • Return conveyor heating

iCure Infrared (IR) Heat Curing Oven Series


Transmission System
Board / Pallet Width50-460 mm (1.96″ -18.11″)
Component Height± 100 mm (± 3.93″)
Conveyor Height900 ± 20 mm (35.43″ ± 0.79″)
Process FlowL to R (Standard),
R to L (Optional)
Conveyor Speed (XY)0.5 – 5 m/min
Convery Width AdjustmentManual
Maximum Load4 kg/m at even distribution
Temperature Configuration
Number of Heat Zones2 Heat Zones
Temperature Control RangeRoom temperature – 100 °C (adjustable)
Heating Zone Power600W x 7 heat tubes per zone
Temperature Stabilization Time10 minutes
Temperature Control Accuracy±5 °C
Facility
Standard FootprintL 2000 x W 1070 x H 1155 mm
(L 78.74″x W 42.13″x H 45.47″)
Weight400 kg
Exhaust Requirement5 m³/min (177 CFM)
Power3 Phase 380 VAC (Standard), 208/480 VAC with transformer (Optional)
Rated Power9.0 kW
Interface
ControllerPLC and touch screen
Communication ProtocolsSMEMA & IPC-CFX
Transmission System
Board / Pallet Width50-460 mm (1.96″ -18.11″)
Component Height± 100 mm (± 3.93″)
Conveyor Height900 ± 20 mm (35.43″ ± 0.79″)
Process FlowL to R (Standard),
R to L (Optional)
Conveyor Speed (XY)0.5 – 5 m/min
Convery Width AdjustmentManual
Maximum Load4 kg/m at even distribution
Temperature Configuration
Number of Heat Zones3 Heat Zones
Temperature Control RangeRoom temperature – 100 °C (adjustable)
Heating Zone Power600W x 7 heat tubes per zone
Temperature Stabilization Time10 minutes
Temperature Control Accuracy±5 °C
Facility
Standard FootprintL 3000 x W 1070 x H 1155 mm
(L 118.11″x W 42.13″x H 45.47″)
Weight700 kg
Exhaust Requirement5 m³/min (177 CFM)
Power3 Phase 380 VAC (Standard), 208/480 VAC with transformer (Optional)
Rated Power13.0 kW
Interface
ControllerPLC and touch screen
Communication ProtocolsSMEMA & IPC-CFX
Transmission System
Board / Pallet Width50-460 mm (1.96″ -18.11″)
Component Height± 100 mm (± 3.93″)
Conveyor Height900 ± 20 mm (35.43″ ± 0.79″)
Process FlowL to R (Standard),
R to L (Optional)
Conveyor Speed (XY)0.5 – 5 m/min
Convery Width AdjustmentManual
Maximum Load4 kg/m at even distribution
Temperature Configuration
Number of Heat Zones4 Heat Zones
Temperature Control RangeRoom temperature – 100 °C (adjustable)
Heating Zone Power600W x 7 heat tubes per zone
Temperature Stabilization Time10 minutes
Temperature Control Accuracy±5 °C
Facility
Standard FootprintL 4000 x W 1070 x H 1155 mm
(L 157.48″x W 42.13″x H 45.47″)
Weight1000 kg
Exhaust Requirement5 m³/min (177 CFM)
Power3 Phase 380 VAC (Standard), 208/480 VAC with transformer (Optional)
Rated Power18.0 kW
Interface
ControllerPLC and touch screen
Communication ProtocolsSMEMA & IPC-CFX