INLINE HEAT CURING OVENS

Download Datasheet >   Contact Us >

iCure Series Inline Infrared Heat Curing Ovens

Inline Compact Infrared (IR) Rapid Heat Curing Ovens


Conformal Coatings, Adhesive Glues, and Heat Curable Inks

Anda iCure Series are compact, inline infrared (IR) heat curing oven systems. iCure is highly unique, it combines SMEMA height upper and lower (optional) return conveyor curing within the same compact work cell. This enables iCure to perform the job of ovens twice its length for applications that require a second oven to cure coatings, adhesives or inks applied to an inverted Pallet/PCBA. The iCure Series provides manufacturers a 100% reduction in factory oven floor space.

The systems SMEMA communication and touch screen control interface integrates into new or existing factory automation lines or can also be used stand-alone. Pairs seamlessly with selective conformal coating spraying systems.Ea

Inline Heat Curing Oven Models & Specifications


Transmission System
Board / Pallet Width 50-460 mm (1.96″ -18.11″)
Component Height ± 100 mm (± 3.93″)
Conveyor Height 900 ± 20 mm (35.43″ ± 0.79″)
Process Flow L to R (Standard), R to L (Optional)
Conveyor Speed (XY) 0.5 – 5 m/min
Convery Width Adjustment Manual
Maximum Load 4 kg/m at even distribution
Temperature Configuration
Number of Heat Zones 2 Heat Zones
Temperature Control Range Room temperature – 100 °C (adjustable)
Heating Zone Power 600W x 7 heat tubes per zone
Temperature Stabilization Time 10 minutes
Temperature Control Accuracy ±5 °C
Facility
Standard Footprint L 2000 x W 1070 x H 1155 mm (L 78.74″x W 42.13″x H 45.47″)
Weight 400 kg
Exhaust Requirement 5 m³/min (177 CFM)
Power 3 Phase 380 VAC (Standard), 208/480 VAC with transformer (Optional)
Rated Power 9.0 kW
Interface
Controller PLC and touch screen
Communication Protocols SMEMA & IPC-CFX
Transmission System
Board / Pallet Width 50-460 mm (1.96″ -18.11″)
Component Height ± 100 mm (± 3.93″)
Conveyor Height 900 ± 20 mm (35.43″ ± 0.79″)
Process Flow L to R (Standard), R to L (Optional)
Conveyor Speed (XY) 0.5 – 5 m/min
Convery Width Adjustment Manual
Maximum Load 4 kg/m at even distribution
Temperature Configuration
Number of Heat Zones 3 Heat Zones
Temperature Control Range Room temperature – 100 °C (adjustable)
Heating Zone Power 600W x 7 heat tubes per zone
Temperature Stabilization Time 10 minutes
Temperature Control Accuracy ±5 °C
Facility
Standard Footprint L 3000 x W 1070 x H 1155 mm (L 118.11″x W 42.13″x H 45.47″)
Weight 700 kg
Exhaust Requirement 5 m³/min (177 CFM)
Power 3 Phase 380 VAC (Standard), 208/480 VAC with transformer (Optional)
Rated Power 13.0 kW
Interface
Controller PLC and touch screen
Communication Protocols SMEMA & IPC-CFX
Transmission System
Board / Pallet Width 50-460 mm (1.96″ -18.11″)
Component Height ± 100 mm (± 3.93″)
Conveyor Height 900 ± 20 mm (35.43″ ± 0.79″)
Process Flow L to R (Standard), R to L (Optional)
Conveyor Speed (XY) 0.5 – 5 m/min
Convery Width Adjustment Manual
Maximum Load 4 kg/m at even distribution
Temperature Configuration
Number of Heat Zones 4 Heat Zones
Temperature Control Range Room temperature – 100 °C (adjustable)
Heating Zone Power 600W x 7 heat tubes per zone
Temperature Stabilization Time 10 minutes
Temperature Control Accuracy ±5 °C
Facility
Standard Footprint L 4000 x W 1070 x H 1155 mm (L 157.48″x W 42.13″x H 45.47″)
Weight 1000 kg
Exhaust Requirement 5 m³/min (177 CFM)
Power 3 Phase 380 VAC (Standard), 208/480 VAC with transformer (Optional)
Rated Power 18.0 kW
Interface
Controller PLC and touch screen
Communication Protocols SMEMA & IPC-CFX

Inline Heat Curing Oven Features

Standard Features


  • PLC and touch screen control
  • Edge carrying, variable speed pin chain conveyor
  • Rail expansion compensation
  • SMEMA communication protocol
  • 100 mm top and bottom side component clearances
  • Thermocouple process control
  •  Independent Infrared (IR) heating zones

Optional Features


  • Lower return conveyor
  • Lower return conveyor with IR heat curing zones